Live demonstration in Saint Petersburg, Florida October 4, 2019 I will drill, print, and solder using the Voltera V-One on…
Live demonstration in Clearwater, Florida August 8 I will drill, print, and solder using the Voltera V1 this Thursday, August…
It’s how we ‘fine tune’ a circuit, or fix a mistake. Just grab a through-hole resistor and solder iron and…
Rivets !There are two reasons to use copper rivets/eyelets on every through-hole lead for two-sided PCBs. First, it makes soldering…
Pre-tin the component leads ! This will save you a great deal of trouble and time. Put a ‘healthy coat’…
I have purposely avoided mentioning what particular DPCB machine I am using because I do not want anyone to mistakenly…
Kirt Blattenberger of www.RFcafe.com asked in a recent email “what is your motivation for diving into this realm?” referring to…
As explained in an earlier post, the ink has to be cured. This is done by baking. Do not rush.…
When we switch to lead-free solder, we will have two types of soldering to re-learn – hand soldering and re-flow…
Most of my DPCB (desktop printed circuit board) burnishing problems all have one cause: impatience. Some things just should not…